Text from the interactive explanation
Fermiology-driven goniopolar transverse thermoelectricity in kagome metals
Haihua Hu, Yiwei Ju, Erjian Cheng, Xiaolong Feng, Fei Sun, Rui Lou, Walter Schnelle, Ralf Koban, Honghui Wang, Alexander Fedorov, Oleksandr Suvorov, Anupam Jana, Jun Fujii, Ivana Vobornik, Denis V. Vyalikh, Bernd Büchner, Bin He, Xiaoqing Pan, Claudia Felser
Original paperGoniopolar kagome metals · Nature Materials 2026
In LuCo₆Ge₆ the charge carriers behave like electrons when they move along the atomic layers and like holes when they move across them. Tilt the layers to the heat flow and the two kinds pile up on opposite faces — the voltage comes out at right angles to the heat, with no magnet involved.
Drag the crystal to turn its layers
electron-like (n-type, −)
hole-like (p-type, +)
heat flow
electric field
Curve: prediction from the two measured axis values (Fig. 3a). ◆: measured on a 45° bar (Fig. 3b). The sign of the measured value depends only on how the contacts are labelled.
The moving carriers are an illustrative particle model driven by the measured Seebeck coefficients; the numbers come from the paper.
Measured 01 · LuCo₆Ge₆, Fig. 3a
One crystal, two signs
A temperature difference makes charge carriers drift from hot to cold and builds a voltage. The Seebeck coefficient S measures it — negative when the carriers act like electrons (n-type), positive when they act like holes, missing electrons that behave as positive charges (p-type).
In LuCo₆Ge₆ the answer depends on direction. Along the kagome layers SIP stays negative from 60 to 300 K; across the layers SOP rises from about zero to +9.1 µV/K. The paper calls this goniopolarity : axis-dependent carrier polarity.
Seebeck coefficient vs temperatureDrag or use arrow keys on the cursor
Synced with the temperature slider above. Points: measurements redrawn from the paper’s Source Data (Fig. 3a).
Hall coefficient RH (10⁻¹⁰ m³/C)Fig. 3a inset
The Hall effect agrees: RH in-plane is negative and out-of-plane positive — electrons carry current along the layers, holes across them.
Why tilting helps
S∥ = SIP cos²θ + SOP sin²θ S⊥ = (SOP − SIP) sinθ cosθ
At θ = 45° the sideways part (SOP − SIP)/2 adds the two magnitudes while the along-heat part (SOP + SIP)/2 nearly cancels. At 300 K that predicts 13.1 µV/K; the 45° bar measured 18.4 µV/K .
The Cr siblings do the reverse: holes along the layers, electrons across them (Supplementary Table 1, µV/K).
Simulation 02 · The paper’s kagome model, Fig. 1
Where the two personalities come from
The kagome lattice is a net of corner-sharing triangles. Electrons hopping on it interfere in two special ways. Some states are trapped on hexagonal loops and form a flat band : they cannot move within a layer at all, only hop between layers. Other states meet at saddle points (van Hove singularities), where the band curves up in one direction and down in another.
Slide the Fermi level — the energy of the carriers that do the conducting — and watch the in-plane and out-of-plane Seebeck coefficients part ways.
Simulation of the paper’s single-orbital kagome model, Fig. 1ti = −0.5 eV · 300 K · constant relaxation time
The paper uses −0.2 eV; its Supplementary Fig. 1 shows a strong coupling of −1 eV still gives goniopolar zones.
Fermi surface at this energydrag to orbit
Hexagonal prism: the first Brillouin zone (kx–ky plane horizontal, kz axis drawn at 70 % scale). Near 0.85–0.95 eV the flat band gives two flat sheets plus a pocket (Fig. 1c); near 0.1–0.3 eV you see the saddle-shaped surface (Fig. 1d).
The model
One orbital per site, in-plane hopping ti and inter-layer hopping to. The supplementary note splits the Seebeck coefficient into three terms, S = −(π²kB²T/3|e|)·(d ln g/dε + d ln v²/dε + d ln τ/dε): density of states, velocity (kinetic) and relaxation time (taken constant). A flat band has no in-plane velocity, so it only conducts along the stacking direction.
Mechanisms 03 · Fig. 1 and Fig. 4
Two routes to goniopolarity
The three crystals reach opposite carrier signs in two different ways — one needs two kinds of carriers, the other gets by with one.
DFT calculation · LuCo₆Ge₆ (Fig. 4c–e)
Route 1 — a flat band and a partnertwo-band mechanism
The calculation finds a quasi-one-dimensional hole pocket A, born from the flat band at kz = π, and an isotropic electron pocket C. Each pocket adds its Seebeck coefficient weighted by its conductivity. Along the layers A and C conduct about equally and C’s large negative value wins. Across the layers A conducts about six times better — enough to tip the balance.
Two-pocket illustration using the paper’s per-pocket values at 300 K (out-of-plane SA = +29.8, SC = −102.3; in-plane SA = +43.8, SC = −91.7 µV/K). The full DFT sum including all pockets gives SIP = −7.9 and SOP = +2.7 µV/K at 300 K (Fig. 4e).
Model · saddle point (Fig. 1f–h)Bands checked by ARPES
Route 2 — one band, two massessingle-band mechanism · LuCr₆Ge₆, HoCr₆Ge₆
Near a three-dimensional saddle point, H = c₁kx² + c₂ky² − c₃kz², the same band curves up within the plane (electron-like) and down along the stacking direction (hole-like). Below the saddle the Fermi surface is two separate cups; above it they merge into one hourglass, and the out-of-plane response turns positive while the in-plane one stays negative.
Chart: the paper’s saddle-point model (Fig. 1h source data). ARPES measurements on LuCr₆Ge₆ revealed multiple Dirac points and van Hove singularities, well reproduced by the calculated bands, which also show flat bands near the Fermi level (Fig. 4f, measured).
Measured 04 · Zero magnetic field, Fig. 3
Sideways power without a magnet
The usual way to get a transverse thermoelectric voltage at zero field is the anomalous Nernst effect (ANE). It needs a magnetic material, stays below about 6 µV/K and leaves stray magnetic fields. LuCo₆Ge₆ is a paramagnetic metal: it needs neither a magnet nor magnetic order, because its sideways response comes from goniopolarity alone.
Tap or hover a point for its name and value.
Why zero field matters: without a magnet there is no stray-field interference, so such devices could sit next to other electronics, and transverse generators can wrap flexibly around curved heat sources for waste-heat recovery or solid-state cooling.
Structure 05 · Fig. 2 and Supplementary Data 1
Inside the crystal
LuCo₆Ge₆ stacks kagome nets of cobalt atoms, with lutetium and germanium layers in between. Electron microscopy shows the arrangement column by column.
LuCo₆Ge₆, 2 × 2 × 2 cellsStructure from the paper’s Supplementary Data 1
HAADF-STEM, measured
Viewed along [010], the Co columns are slightly elongated in the in-plane direction (Fig. 2e,f) — a small in-plane disorder shift of the Co atoms. The authors suggest it may scatter carriers and phonons within the layers, contributing to the anisotropic resistivity and to the low in-plane lattice thermal conductivity.
06 · Source & credits
The paper
Fermiology-driven goniopolar transverse thermoelectricity in kagome metals
Haihua Hu, Yiwei Ju, Erjian Cheng, Xiaolong Feng, Fei Sun, Rui Lou, Walter Schnelle, Ralf Koban, Honghui Wang, Alexander Fedorov, Oleksandr Suvorov, Anupam Jana, Jun Fujii, Ivana Vobornik, Denis V. Vyalikh, Bernd Büchner, Bin He, Xiaoqing Pan & Claudia Felser
Nature Materials 25, 1783–1790 (2026). DOI: 10.1038/s41563-026-02678-4 · Article page
Open Access, CC BY 4.0 (https://creativecommons.org/licenses/by/4.0/). Images: Figs. 2a, 2c and 3b inset, cropped. Charts redrawn from the paper’s Source Data; the band explorer recomputes the paper’s tight-binding model in your browser; the crystal animation is an illustrative particle model driven by measured Seebeck coefficients.
3D views rendered with three.js (MIT License).
Topics in this iPaper
Physics
serves as an archetypal platform for probing correlated electron physics and emergent quantum states
Introduction, page 1783
Engineering
positioning the goniopolar thermoelectric technology as a promising route for waste heat recovery and solid-state cooling
Outlook, page 1789
thermoelectrics
Thermoelectricity is a solid-state energy conversion mechanism that enables the direct interconversion of thermal and electrical energy
Introduction, page 1783
goniopolarity
Here we propose goniopolarity (axis-dependent carrier polarity) to achieve high zero-field transverse thermoelectric responses in kagome systems
Abstract, page 1783
transverse thermoelectric effect
Goniopolarity can induce a transverse thermoelectric response under zero magnetic field
Goniopolarity and transverse thermoelectric effect, page 1787
kagome lattice
The kagome lattice, a two-dimensional network of corner-sharing triangles
Introduction, page 1783
van hove singularity
By exploiting flat-band- and van Hove singularity-driven electronic states
Abstract, page 1783
density functional theory
we investigated their band structures using density functional theory (DFT) calculations and angle-resolved photoemission spectroscopy (ARPES)
Origin of the goniopolarity in LuCo6Ge6 and its siblings, page 1787
angle resolved photoemission spectroscopy
we investigated their band structures using density functional theory (DFT) calculations and angle-resolved photoemission spectroscopy (ARPES)
Origin of the goniopolarity in LuCo6Ge6 and its siblings, page 1787
scanning transmission electron microscopy
Scanning transmission electron microscopy (STEM) was used to investigate the atomic structures
Characterization of kagome single crystals, page 1786